Thank you for your visit.
Follow these three easy steps and enjoy TTL underwater photography!
Slide the adapter into the hotshoe
Connect the wired or LED connector to the adapter
Finally: power on the system
A lot of useful functions in one tiny device!
The world's smallest TTL controller for Canon and Nikon cameras. 35 mm long, 25 mm wide and 14 mm high.
The TURTLE is juiced up to handle 2,000 images on a single charge. And it arrives bundled with a charger that allows a full recharge within 1 hour ...
Should you choose cable or synchronous optical LED connections – Turtle has the connector interface to handle both options. On the rear of Turtle is a connector interface for both cable and synchronous optical LED connections.
Full TTL mode compatible with: Sea&Sea D1, D2, YS250 INON Z220, Z240, Z330, Ikelite (full series) and S110Alpha. Optical sync compatible with: Sea&Sea D1, D2 and Z 240 ,Z330 S110 Alpha
It’s all up to you: switch between 1st or 2nd curtain mode for perfect rendering of motion. Also, sometimes you need flash power correction: not a problem, Turtle handles this as well…
With optical flash syncronization, you can take more pictures: no more overheating problem with the built in flash, no more single images – and it also saves battery life in the camera.
You can easily set Turtle to communicate with your underwater strobes: just use the DIP switch on the bottom of the device (4 options cover 6 strobe brands)
Forget the need of another extra battery: Turtle has it’s own inside it’s sleek package. All you need is a USB charger or anything with a USB port to charge it to full power, and it only takes an hour.
As small as it can get, TRTTL is the ultimate camera-to-strobe controller device – don’t let size fool you, this little box is a hell of a beast, wait until you unleash it’s full potential!
At the moment, our range of TURTLE TTL converters consist of i-TURTLE and XS for Nikon systems, e-TURTLE for CANON systems, s-TURTLE for SONY MILC systems and the new o-TURTLE for Olympus/Panasonic systems!
What is in the box….
Don’t take our word, see what our experts say about the controllers: we have got more and more of positive reviews.
"Finally I made the tests with Canon 5Dmk3. It is working very well even with Sea&Sea D2, with ordinary optic cables, congratulation." Józef Bodziony
"It all worked out perfectly - super service – thank you!" Tom Peter
"Moreover not only the product is great also the costumer service." Markus Meissl e-TURTLE mobie Canon 5D mk2
Got questions about our TTL converters? We’ve got answers. If you have some other questions, feel free to send us an email to firstname.lastname@example.org
First of all you can check the space in the housing. After this you have to measure the distance between the connector to the adapter and order a special cable. After the products arrive you just put the controller in the hotshoe, turn it on using the main switch, setup your strobe brand using the DIP at the bottom of the controller and connect the special cable to the device.
Turtle electronics were made from special SMD technologies parts to ensure the smallest form factor and is enclosed into a plastic (SLA technolgies) case (which is lighter than stainless steel). The hotshoe was made from PCB with special spring loaded pins to ensure optimal connection with the camera. All electronics have a LIPO 240 mAh recharchable batters that the user can charge with the yellow charger (included the package).
Yes, of-course, because we can give you a special plastic window for the old housing which is like an electronic connector, but contains an LED at the dry side and a normal optical hole in the wet side. This way you can connect the fiber optic cable to this special port.